In the current project, the blade structure is analyzed mainly on the following four aspects mentioned below:Maximum Strength AnalysisStability Analysis (Buckling)Analysis deflection (to prevent the blades from hitting the tower) Analysis with different cores to check rigidity. Additionally, fatigue failure analysis is also included in actual field testing. The first process of wind turbine design involves calculating the different loads expected on the blade surface during operating wind conditions, which in turn are used to calculate stresses and deflections. These stresses and strains are then compared to the design stresses and strains of the material from which the component is to be manufactured. Additionally, the blade structure must satisfy a number of design criteria based on material properties and structural configuration which are described below. Aeroelastic modeling of the blade must be verified in addition to detailed aeroelastic calculations. Full-scale static and fatigue testing should be performed for new blade designs with the test l...