HydroponicsIntroductionNAME HERE and I became fascinated with hydroponics and the idea that you don't have to get your hands dirty to be a great gardener, and if you like us, it t's a good thing.The idea of ​​hydroponics has been around since the pyramids were built, but in all those years it never seemed to catch on. It took about 4,600 years before the first scientist became interested in hydroponics and adapted it for cultivation. He was a professor at the University of California, and the result was a 25-foot tomato plant that had to be harvested by a ladder. This is how hydroponics was reborn and has continued to progress ever since. However, until 5 years ago, the amateur grower and the general public were unaware of hydroponics. It was only used by commercial producers. But now it has caught on and resulted in this experiment. When you think about hydroponics, you have to think about hydroponics applications. Not only does metered hydroponics produce bigger, better quality, healthier plants than traditional soil, but it can also be greatly beneficial on things like submarines, space stations, offshore oil rigs or any other place where dirt is hard to find. During this experiment, we will research which plant does best with hydroponics, measuring which plant has grown taller or bushier. We also look for green, healthy-looking leaves on the plants. We have no idea what the results might be, so it should be an exciting experience. ProblemWhich form of plant life will thrive most in hydroponic enrichment? Will it be tomatoes our fruit, peas our vegetable, Tinker Bell flowers or beans a legume? We first selected a suitable PVC pipe and cut it into a 4 foot long piece. Next, we cut four holes in the pipe with a jigsaw. After that we drilled two holes for the brass tees to fit into. Then we glued the two caps. After that we drilled two holes, one for the bucket and the other for the plastic pipe. Then we glued the 20mm pipe into one of the holes. After that, we cut our 4 inch PVC pipe and glued the cap to it. Next, we drilled two holes in the pipe and inserted two brass noses into the holes we just drilled. Now take the plastic pipe and cut it into 4 pieces. One part is for drainage, one for subtank and two for subtank separation.